Mar

Volvo Trucks launches I-Shift with crawler gears

2016-03-16 10:38
The new Volvo I-Shift with crawler gears offers an entirely new scope for extra heavy trucks with automated transmission to regulate their speed when crawling slowly and even reversing.

Volvo Trucks has introduced a new member to the I-Shift family: I-Shift with crawler gears. The new gears, which are added to the vehicle’s automated transmission, provide specialised start capability for trucks carrying heavy loads in demanding situations.

Volvo Trucks’ new version of I-Shift makes it possible to add up to two new crawler gears resulting, among other things, in the ability to start-off from standstill and transport a gross combination weight (GCW) of up to 325 tonnes.

“I-Shift with crawler gears offers an entirely new scope for extra heavy trucks with automated transmission to regulate their speed when crawling slowly and even reversing. The driver can haul a heavy load without worrying about getting into situations that may lead to costly standstills,” says Malcolm Gush, sales director at Volvo Trucks South Africa.

“This new technology will also be available in South Africa where extreme road and weather conditions often have a big impact on a fleet’s productivity, safety and profitability,” he adds.

With the new crawler gears, the truck can drive at speeds as low as 0.5 to 2 km/h. This helps immensely during precision manoeuvres such as in construction and maintenance tasks.

“The vastly improved driveability and starting capability with the new crawler gears makes the driver’s job far easier when operating in difficult terrain on slippery surfaces with heavy loads, such as at construction sites, in mines or in forests. The heavier the transport operation and the poorer the surface or the terrain, the more the driver gains from a truck with crawler gears,” explains Gush.

For haulage firms carrying out heavy transport operations on demanding surfaces as well as regular highway driving, crawler gears also offer considerable flexibility and the possibility of improved fuel economy.

“I-Shift with crawler gears makes it possible to start-off from standstill in extreme situations. Combining them with a suitable rear axle ratio that optimises engine revs at high speeds results in lower fuel consumption on the highway. This is a significant benefit to haulage firms operating in these scenarios,” says Gush.

Depending on the application, I-Shift is available with one or two forward crawler gears – and with or without two reverse crawler gears. Reverse crawler gears make it possible to reverse extremely slowly, which is a major advantage when reversing manoeuvres require immense precision.

The low crawler gears are integrated into the I-Shift transmission. In order to handle the high loads involved, several components are made of high-strength materials. The gearbox is 12 cm longer than a conventional I-Shift unit. I-Shift with crawler gears is available for Volvo Trucks’ 13- and 16-litre engines in the Volvo FM, Volvo FMX, Volvo FH and Volvo FH16.

Ratios
In a gearbox with one crawler gear the ratio is 19:1 in a direct-drive gearbox, or 17:1 in an overdrive gearbox. (The ratio of the lowest gear in a regular I-Shift direct-drive gearbox is 15:1.) In a direct-drive or an overdrive gearbox with two crawler gears the lowest ratio is 32:1. The ratio of the lowest reverse gear is 37:1 in a direct-drive gearbox.

Tags: , , , , , ,
COMMENT ON THIS STORY
0 comments

Add Your Comment

five + 19 =